*If product is required to meet one of the above standards, please notate it on your purchase order to ensure that you are provided with the proper product.
×
Applicable Pipe Standards
- ASTM F405 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings
- ASTM F667 Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
- AASHTO M252 Specification for Corrugated Polyethylene Drainage Pipe
- AASHTO M294 Specification for Corrugated Polyethylene Pipe, 300- to 1500-mm Diameter
- ASTM F2648 Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
- ASTM F810 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
- ASTM D3212 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
- ASTM D3350 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
- ASTM D5921 Standard Practice for Subsurface Site Characterization of Test Pits for On-Site Septic Systems
- ASTM F481 Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
- SCS 606 Corrugated polyethylene plastic tubing
- ASTM D638 Test Method for Tensile Properties of Plastics
- ASTM D1238 Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
- ASTM D792 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
- ASTM D1505 Test Method for Density of Plastics by the Density-Gradient Technique
- ASTM D4703 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
- ASTM D4218 Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds by the Muffle Furnace Technique
- ASTM D2122 Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
- ASTM D2412 Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
- ASTM D2444 Test Method for Determination of Impact Resistance of Thermoplastic Pipe and Fittings by Means of a TUP (Falling Weight)
- ASTM D3350 Specification for Polyethylene Plastics Pipe and Fittings Materials
- ASTM F2136 Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
- ASTM D256 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
- LEED Certifications may be available for certain projects. Please inquire upon order..